Sony 4-144-907-43(1) User Manual

D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\050AMP_GB.fm

STR-DA3500ES
4-144-907-43(1)

• AMP

The HDMI audio signals from the playback 
component is only output to speakers 
connected to the receiver. The multi channel 
sound can be played back as it is.
Note

Audio signals are not output from the TV’s 
speakers when “Audio Out” is set to “AMP”.

x 24p Auto Sound Sync 

Lets you turn the “24p Auto Sound Sync” 
function on or off. This allows HD-D.C.S. to 
be selected as the optimum sound field 
automatically when 24p (24 frames per 
second) signal are input from a playback 
component, such as a Blu-ray disc player.
• OFF
• ON

When “Control for HDMI” is set to “ON”, the 
receiver detects the 24p signals via “BRAVIA” 
Sync. Therefore, if a player that is not compatible 
with “BRAVIA” Sync sends out 24p signals, the 
receiver will not switch the sound field to 
HD-D.C.S. On the other hand, when “Control for 
HDMI” is set to “OFF”, the receiver detects the 24p 
signals by itself.

x Subwoofer Level 

Lets you set the level of the subwoofer to 0 dB 
or +10 dB when PCM signals are input via an 
HDMI connection. You can set the level for 
each HDMI input independently.
• 0  dB
• +10  dB
• AUTO

The subwoofer level is automatically set to 
0 dB or +10 dB depending on the frequency.

You can use the System settings menu to 
customize the settings of the receiver. Select 
“System” in the Settings menu. For details on 
adjusting the parameters, see “7: Operating the 
receiver using the GUI (Graphical User 
Interface)” (page 40).

x Screen Saver (Screen Saver)

Lets you activate the screen saver function for 
the GUI menu on the TV connected to the 
receiver.
• OFF

The screen saver function is disabled.

• ON

When there has been no operation attempted 
for 15 minutes, the screen saver function is 
activated automatically.

x Installer Mode (Installer Mode)

Lets you select the control mode for 
maintenance and service.
• OFF
• RS232C

x Language (Language)

Lets you select the language for the GUI menu 
on the TV connected to the receiver.
• English
• Español
• Français
• Deutsch