Sony KLV-40U100M User Manual
3
KLV-32U100M
2-668-009-13(1)
G:\#Sagyo\SONY\09 TV\kaihan
KLV-32U100M\1219_KLV32U100M_rev\2668009131\2668009131
KLV-32U100M_US\01US02WAR.fm
KLV-32U100M\1219_KLV32U100M_rev\2668009131\2668009131
KLV-32U100M_US\01US02WAR.fm
masterpage:3 columns Right
WARNING
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
not expose this apparatus to rain or moisture.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the
product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
alert the user to the presence
of uninsulated “dangerous
voltage” within the
product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the
appliance.
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the
appliance.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION
To prevent electric shock, do not use this
polarized AC plug with an extension cord,
receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
polarized AC plug with an extension cord,
receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
NOTIFICATION
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
s
Reorient or relocate the receiving
antenna.
antenna.
s
Increase the separation between the
equipment and receiver.
equipment and receiver.
s
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
circuit different from that to which the
receiver is connected.
s
Consult the dealer or an experienced
radio/TV technician for help.
radio/TV technician for help.
For Customers in Canada
This Class B digital apparatus complies with
Canadian ICES-003.
Canadian ICES-003.
Safety
s
Operate the unit only on 120 V AC.
s
Use the AC power cord specified by Sony
and suitable for the voltage where you use
it.
and suitable for the voltage where you use
it.
s
The plug is designed, for safety purposes,
to fit into the wall outlet only one way. If
you are unable to insert the plug fully into
the outlet, contact your dealer.
to fit into the wall outlet only one way. If
you are unable to insert the plug fully into
the outlet, contact your dealer.
s
If any liquid or solid object should fall
inside the cabinet, unplug the unit
immediately and have it checked by
qualified service personnel before
operating it further.
inside the cabinet, unplug the unit
immediately and have it checked by
qualified service personnel before
operating it further.
s
If you will not be using the unit for several
days, disconnect the power by pulling the
plug itself. Never pull on the cord.
days, disconnect the power by pulling the
plug itself. Never pull on the cord.
s
For details concerning safety precautions,
see “Important Safety Instructions” on
page 4 and “Important Safeguards” on
page 5.
see “Important Safety Instructions” on
page 4 and “Important Safeguards” on
page 5.
Installing
s
The unit should be installed near an easily
accessible power outlet.
accessible power outlet.
s
To prevent internal heat buildup, do not
block the ventilation openings.
block the ventilation openings.
s
Do not install the unit in a hot or humid
place, or in a place subject to excessive
dust or mechanical vibration.
place, or in a place subject to excessive
dust or mechanical vibration.
s
Avoid operating the unit at temperatures
below 5°C (41°F).
below 5°C (41°F).
s
If the unit is transported directly from a
cold to a warm location, or if the room
temperature changes suddenly, the picture
may be blurred or show poor color due to
moisture condensation. In this case,
please wait a few hours to let the moisture
evaporate before turning on the unit.
cold to a warm location, or if the room
temperature changes suddenly, the picture
may be blurred or show poor color due to
moisture condensation. In this case,
please wait a few hours to let the moisture
evaporate before turning on the unit.
s
To obtain the best picture, do not expose
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling or
to cover the windows that face the screen
with opaque drapery. It is desirable to
install the unit in a room where the floor
and walls are not of a reflective material.
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling or
to cover the windows that face the screen
with opaque drapery. It is desirable to
install the unit in a room where the floor
and walls are not of a reflective material.
CAUTION
Use the following Sony appliance(s) only with
the following WALL-MOUNT BRACKET.
the following WALL-MOUNT BRACKET.
Use with other WALL-MOUNT BRACKET
may cause instability and possibly result in
injury.
may cause instability and possibly result in
injury.
SONY APPLIANCE MODEL NO.
KLV-32U100M
KLV-40U100M
SONY WALL-MOUNT BRACKET MODEL NO.
SU-WL31 (KLV-32U100M)
SU-WL51 (KLV-40U100M)
To Customers
Sufficient expertise is required for installing the
specified product. Be sure to subcontract the
installation to Sony dealers or licensed
contractors and pay adequate attention to safety
during the installation.
specified product. Be sure to subcontract the
installation to Sony dealers or licensed
contractors and pay adequate attention to safety
during the installation.
For Customers in the United
States
States
If you have any questions about this product,
you may call; Sony Customer Information
Services Center 1-800-222-7669 or
http://www.sony.com/
you may call; Sony Customer Information
Services Center 1-800-222-7669 or
http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: KLV-32U100M/KLV-40U100M
Model: KLV-32U100M/KLV-40U100M
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
Responsible Party: Sony Electronics Inc.
Address: 16450 W. Bernardo Dr,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
Address: 16450 W. Bernardo Dr,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
Pursuant to FCC regulations, you are
cautioned that any changes or modifications
not expressly approved in this manual could
void your authority to operate this
equipment.
cautioned that any changes or modifications
not expressly approved in this manual could
void your authority to operate this
equipment.
(Continued)
01US02WAR-UC.book Page 3 Monday, December 19, 2005 1:58 PM