Combi 8000 Series User Manual
C MBI
®
Designed by Parents, for Parents
Keep this instruction manual for future use.
Store instruction manual inside LATCH storage
compartment located on front of lower base.
COMBI International Corporation • 189-199 Easy St. • Carol Stream, IL 60188 •
Customer Service Telephone 1-800-992-6624 • Se Habla Español 1-630-871-0404 •
Fax 1-630-871-0606 • www.combi-intl.com •
10:00 a.m. - 5:00 p.m. Central Time • Monday - Friday
© 2003 COMBI International Corporation
TICS1103
TICS25
Securing Base With Lap and Shoulder Belt:
To prevent ejection, metal support ring MUST be used when using lap and shoulder belt.
Follow steps through on page 17 of this manual.
1
6
7
After buckling vehicle belt, install metal support ring (fig. a)
around lap and shoulder belt:
around lap and shoulder belt:
- Install metal support ring on the opposite side of base from
the vehicle buckle (fig. b and fig. c).
the vehicle buckle (fig. b and fig. c).
- Pinch lap belt and shoulder belt together.
- Slide belts into open slot in metal support ring and hook
under inner leg to position lap belt and shoulder belt
inside metal support ring (fig. d).
under inner leg to position lap belt and shoulder belt
inside metal support ring (fig. d).
NOTE: Both the lap belt and shoulder belt MUST be
inside metal support ring (fig. d).
Tighten vehicle belt to secure the base. Follow
steps through on page 18 of this manual.
steps through on page 18 of this manual.
Keep metal support ring for future use. Store in LATCH
compartment when not in use.
compartment when not in use.
(fig. a)
Open
Slot
Inner
Leg
(fig. b)
Passenger
Side
Metal
Support Ring
(fig. c)
Metal
Support Ring
Driver
Side
(fig. d)
8
7
10
Vehicle
Buckle
Metal Support
Ring
33
WARNING DEATH or SERIOUS INJURY can occur