Panasonic DP-C354/ C264 User Manual

44

Place Original(s) on the ADF, or Platen
Glass.

1

2

●

Be sure to use only Genuine SD Memory Card (up to 1 GB).

●

Use only Type II, PCMCIA/PC Card Adapters intended for 3.3 V operating voltage. Refer to your PCMCIA/PC Card
Adapter's user manual for compatible Memory Cards and operating voltage specifications.

●

The scanned image(s) cannot be saved to the SD Memory Card, or the PCMCIA/PC Card if the setting of Function
Parameter "84 SD/PC Card Function" (General Settings > Key Operator) is set to "No".
For more details on this setting, refer to General Settings in the Operating Instructions (For Function Parameters)
on the provided CD-ROM.

●

For acceptable memory card for PCMCIA/PC Card Adapter, refer to the PCMCIA/PC Card Adapter's manual.

●

When scanning to the PCMCIA/PC Card Adapter, refer to Scan to the PCMCIA/PC Card in the Operating Instructions
(For Scanner and Email) on the provided CD-ROM.

●

When transferring scanned data to your PC, it is necessary first to install the Panasonic Document Management
System software and set up the scanner configuration on your PC. For more details, refer to the Operating Instructions
(For Setting Up) of provided booklet.

3

Scanned data will be directly transferred to your PC. By
using installed provided software (Panasonic Document
Management System), you can view, or edit the scanned
data on your PC.

or

PCMCIA/PC Card Adapter
(Type II, 3.3 V Operating Voltage Only)

Scanned data will be directly transferred to the
SD Memory Card, or PCMCIA/PC Card Adapter.

●

When scanning from the ADF, read the
Notice for ADF. (See pages 20 and 56)

Press the Scan / Email key if the machine
is set to other function mode.

Select "Basic Menu" to select the
required setting mode, and then select
"OK".

(See pages 46 and 47)

For scan to PC, go step 5.

●

When scanning from the Platen Glass, read the
Notice for Platen. (See pages 20, 21, 56, and 57)

Scan

SD
Memory
Card

Scan