Tektronix AM700 User Manual
HCOPy Subsystem
AM700 Audio Measurement Set Programmer Manual
3–71
HCOPy Subsystem
The AM700 support for hardcopy is non-standard to the 1994 SCPI manual for
hardcopy, but it more closely tracks the way this feature has been previously
implemented. In the SCPI manual, the
hardcopy, but it more closely tracks the way this feature has been previously
implemented. In the SCPI manual, the
MMEMory:OPEN
and
HCOPy:CLOSe
commands were to be used to open and close the file specified by
MMEM:NAME
to
accommodate feeding data from the HCOPy subsystem. This state-dependent style
of feeding data is not used in the AM700.
of feeding data is not used in the AM700.
The AM700 GPIB usage of hardcopy-to-file is as follows. You can send:
mmem:name
file
hcopy:dest
mmem
hcopy
instead of
mmem:name
file
mmem:open
hcopy:dest
mmem
hcopy
mmem:close
The spool-to-file procedure is implemented so that the act of creating the hardcopy
implicitly opens the file at the start, and closes it at the end.
implicitly opens the file at the start, and closes it at the end.
HCOPY
Usage:
This command [HCOPy] immediately initiates the plot or print according to the
current Hard COPy setup parameters. All of the items under the ITEM node
which are turned ON (STATe ON) are plotted or printed.
current Hard COPy setup parameters. All of the items under the ITEM node
which are turned ON (STATe ON) are plotted or printed.
Query:
Event only, no query.