Graco 24K961 User Manual

Perform Startup, page 9.

Use the handle bars of the LineStriper to control all 
motion during operation. In addition to steering the 
LineStriper, the handle bars also control forward and 
reverse movement by pulling the forward/reverse control 
lever.

NOTE: Make sure wheel motor bypass valve is engaged 
(see page 19).

To move forward: Disengage brake and slowly pull 
control lever on right side of handlebar. 

To move in reverse: Slowly pull control lever on left 
side of handlebar. 

To stop: Release control lever and allow it to return to 
center. 

To turn right and left: Turn the handle bar right or left to 
steer the LineStriper.

This unit is equipped with a parking brake. Always 
engage parking brake when not in operation. Brake may 
also be used to stop machine in an emergency situation. 

1.

Step down on the brake lever to engage parking 
brake.

2.

Lift brake lever up with foot to disengage parking 
brake. 

NOTE: Adjust screw for more or less braking force.

ti17516a

ti17517a

ti19115a

ti17518a

ti17519a

ti18550a

+

ti18565a

ti18548a