Epson 1810P User Manual
66
Maintaining the Projector
Replacing the Lamp and Air Filter
The life span of the projection lamp is about 2500 hours if
Brightness
Control
in the Settings menu is set to
High
(default), and
3000 hours if
Brightness
Control
is set to
Low
the lamp usage.
It is time to replace the lamp when:
■
The projected image gets darker or starts to deteriorate.
■
The message
Replace the lamp
appears on the screen when the
lamp comes on and the lamp warning light
flashes orange. To
maintain projector brightness and image quality, replace the lamp
as soon as possible.
as soon as possible.
■
The lamp warning light
flashes red (the lamp is burnt out).
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L40.
(800-463-7766). Request part number V13H010L40.
note
When you get a replacement
lamp for your projector, you
should replace the filter.
lamp for your projector, you
should replace the filter.
Turn off this product when
not in use to prolong the life
of the projector.
not in use to prolong the life
of the projector.
Lamp warning light
User's Guide - 1810.book Page 66 Monday, September 10, 2007 6:39 PM