OKI C830 User Manual

Menu functions - C830 > 43

Network
Setup 
(cont.)

SNMP

Enable
Disable

Sets Enable/Disable of SNMP.
Enable: SNMP is available.
Disable: SNMP is not available.
TCP/IP or NetWare should be enabled.

Network 
Scale

Normal
Small

When Normal is selected, the network can work 
effectively even when it is connected to a HUB that has a 
spanning tree feature. However, printer start up time gets 
longer when computers are connected with two or three 
small LANs.
When Small is selected, computers can cover from two or 
three small LANs to a large LAN, but may not work 
effectively when the network is connected to a HUB with a 
spanning tree feature.

Hub Link 
Setting

Auto Negotiate
100Base-TX Full
100Base-TX Half
10Base-T Full
10Base-T Half

Sets a method to link to a HUB. When Auto is set, a 
connection method to a HUB is selected automatically.

Factory 
Defaults?

Execute

Specifies whether to initialize the network factory default 
settings for the Network.

Print Setup

Personality

Auto
PostScript
PCL
IBM PPR
EPSON FX

Selects a printer language.

Copies

1- 999

Selects the default number of copies.

Duplex

On/Off

Specifies Duplex print (option) if a Duplex unit is installed 
and enabled

Binding

Long Edge
Short Edge

Specifies Binding in duplex printing (if a Duplex unit is 
installed and enabled)

Media Check

Enable
Disable

Sets whether the printer checks the matching of printed 
data size and that of the tray. Only standard sizes are 
checked.

Resolution

600dpi
600x1200dpi
600dpi multi-
level.

Sets default resolution.

Toner Save
Mode

On/Off

This function works effectively only if the data input is 
color RGB data. This setting is valid in PS and PCL, but 
does not take effect in the following cases.
(1) PS: If Color Matching is set OFF.
(2) PS: If any setting other than ASIC Color Matching is 
set.
(3) PS: CMYK data when Ink Simulation Mode is used 
(valid in any other cases except Case (1) and Case (2) 
above as long as data is RGB).
(4) PCL binary data (Color/Monochrome).