Panasonic AG-MX70P User Manual

G/L

MIC

PHONE

USB

ADV-REF

PREVIEW

GPI

AUX IN

1

2

L

R

L

R

AUDIO OUT 2

EDITOR

5

8 9

:

1 2

3 4 6 7

This connector can be set to MIC or AUX 2 on the initial
setting page.

1

2 PHONE (headphone) output connector

The headphones are connected to this connector.

3 USB interface connector

This connector is used to connect to a personal
computer and download files.

4

5

This connector outputs the reference signal with
advanced vertical phase for source input uses.

8 AUX IN (spare) 1 L and R input connectors

AND

9 AUX IN (spare) 2 L and R input connectors

These connectors can be used by making a selection on
the initial setting page.

: AUDIO OUT 2 L and R output connectors

These are unbalanced audio output connectors.

These are loop-through, automatically terminated
connectors.
They supply signals to the source VTR or camera and
initiate genlock.
They enable genlock for the G/L input or EXTKEY input
by making a selection on the initial setting page.

6 PREVIEW output connector

The signals selected by the preview selector button are
output from this connector.

7 GPI input connector

A trigger is applied and a transition is enabled for ME,
DSK or fade as selected on the initial setting page.  The
effect is applied 3 frames later.

KEY

EXT IN

Y

B

P

R

P

IN1

IN2

IN3

IN4

OUT

SDI

1 2 3 4

5 6 7 8 9

This connector can be used for key or DSK applications.
It can also be used for genlock signal using the settings
on the initial setting page.

1

2 External input Y connector

The cross point EXT or DSK Y signal is input to this
connector.
The DSK source can be set on the DSK/FADE setting
page.

3 External input PB connector

The cross point EXT or DSK PB signal is input to this
connector.

9 OUT connector

The connectors listed above are used when the optional
board (AG-YA70) has been installed.

4 External input PR connector

The cross point EXT or DSK PR signal is input to this
connector.
<Notes>

≥

Non-standard signals are not accepted.

≥

Since the input signals do not pass through the frame

synchronizers, they must be synchronized with this

unit.

5

6

7 IN3 connector

8 IN4 connector