Panasonic AG-MX70P User Manual
7
P in P
Mod
i
f
y
PATTERN
REV
LUM
MIX
CHRM
EXT
ONE
WAY
WAY
DSK
EFFECTS
DR
Parts and their functions
REV (reverse) button
This button is used to reverse the keys and transition key
patterns, reverse the frame in/out, and reverse the
chroma key, luminance key, external key and title
patterns, reverse the frame in/out, and reverse the
chroma key, luminance key, external key and title
α key
signals.
The button’s lamp flashes with patterns that have no
reverse operations, indicating that these patterns cannot
be reversed.
The button’s lamp flashes with patterns that have no
reverse operations, indicating that these patterns cannot
be reversed.
1
7
1
2 ONE WAY button
At the AB bus setting stage, this button sets the transition
pattern to a pattern from one direction.
The button’s lamp flashes with preset bus or program
bus or with patterns that have no reverse patterns,
indicating that the effects cannot be executed.
pattern to a pattern from one direction.
The button’s lamp flashes with preset bus or program
bus or with patterns that have no reverse patterns,
indicating that the effects cannot be executed.
3 DSK EFFECTS button
When this button is set to the ON position, the transition
pattern and 3D-DVE are used for DSK. ME is set to
Diss.
When the DSK effects are ON, the chroma key and
luminance key cannot be selected.
This button is set to OFF as the default setting, and
some patterns cannot be used for the DSK effects.
pattern and 3D-DVE are used for DSK. ME is set to
Diss.
When the DSK effects are ON, the chroma key and
luminance key cannot be selected.
This button is set to OFF as the default setting, and
some patterns cannot be used for the DSK effects.
4
5
Direct key pattern buttons
These buttons are used to call the key patterns directly.
With the setup initial settings, key patterns can be set
from the default settings to any patterns.
The settings accompanying borders are also stored in
the memory for each button.
With the setup initial settings, key patterns can be set
from the default settings to any patterns.
The settings accompanying borders are also stored in
the memory for each button.
Direct transition pattern buttons
These buttons are used to directly call the transition
patterns directly. With the setup initial settings, transition
patterns can be set from the default settings to any
patterns.
The settings accompanying borders are also stored in
the memory for each button.
patterns directly. With the setup initial settings, transition
patterns can be set from the default settings to any
patterns.
The settings accompanying borders are also stored in
the memory for each button.
6 MIX button
This is used to call mix transitions.
7 LUM (luminance) key button
This is used to call the luminance key. When it is called,
the previous setting is stored in the memory.
the previous setting is stored in the memory.
8 CHRM (chroma) key button
This is used to call the chroma key. When it is called,
the previous setting is stored in the memory.
the previous setting is stored in the memory.
6
2 3
8
4
5
<Note>
If DSK-Effects has been set to ON for a pattern which is not
supported by DSK using a wipe pattern number, the button’s
lamp flashes to indicate that DSK effects cannot be applied.
If DSK-Effects has been set to ON for a pattern which is not
supported by DSK using a wipe pattern number, the button’s
lamp flashes to indicate that DSK effects cannot be applied.