Yamaha HTR-6160 User Manual
ADVANCED SETUP
106
En
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
• The settings you make are reflected next time you press KMAIN ZONE ON/OFF to turn on this unit (see page 29).
• Only KMAIN ZONE ON/OFF, LSYSTEM OFF, MTONE CONTROL and the NPROGRAM selector are effective while you
• Only KMAIN ZONE ON/OFF, LSYSTEM OFF, MTONE CONTROL and the NPROGRAM selector are effective while you
are using the advanced setup menu.
• No other operations can be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.
• The advanced setup menu is only available in the front panel display.
1
Press L
SYSTEM OFF on the front panel to
set this unit to the standby mode.
2
Press and hold M
TONE CONTROL and
then press K
MAIN ZONE ON/OFF to turn
on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3
Rotate the N
PROGRAM selector to select
the parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
The name of the selected parameter appears in the
front panel display.
4
Press M
TONE CONTROL repeatedly to
change the selected parameter setting.
5
Press L
SYSTEM OFF to save the new
setting and set this unit to the standby mode.
y
The settings you made are reflected next time you turn on
this unit.
The settings you made are reflected next time you turn on
this unit.
■ Speaker impedance
SP IMP.
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8
so that it matches that of your speakers.
Choices: 8
Ω MIN, 6ΩMIN
• Select “
8ΩMIN” to set the speaker impedance to 8 Ω.
• Select “6
ΩMIN” to set the speaker impedance to 6 Ω.
*
The Canada model cannot use two separate speaker systems
(A and B) simultaneously when “SP IMP.” is set to “8
(A and B) simultaneously when “SP IMP.” is set to “8
ΩMIN”.
Advanced setup
Notes
Using the advanced setup
TONE CONTROL
ON/OFF
MAIN ZONE
While holding
down
SPIMP.-8MIN
Currently selected
parameter setting
Currently selected
parameter
SP IMP.
Speaker
Impedance level
8ΩMIN
Front
If you use one set (A or B),
the impedance of each
speaker must be 8
the impedance of each
speaker must be 8
Ω or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 16
B), the impedance of each
speaker must be 16
Ω or
higher.
*
Center
The impedance of each
speaker must be 8
speaker must be 8
Ω or
higher.
Surround
Surround back
6
ΩMIN
Front
If you use one set (A or B),
the impedance of each
speaker must be 4
the impedance of each
speaker must be 4
Ω or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 8
B), the impedance of each
speaker must be 8
Ω or
higher.
Center
The impedance of each
speaker must be 6
speaker must be 6
Ω or
higher.
Surround
Surround back