Yamaha HTR-6160 User Manual

You can use this feature to store up to 40 SIRIUS Satellite 
Radio channels (A1 to E8: 8 preset channel numbers in 
each of the 5 preset channel groups). You can then recall 
any preset channel easily by selecting the preset channel 
group and number as described in “Preset Search mode” 
on page 64.

Search for a channel you want to set as a 
preset channel by using one of the SIRIUS 
Satellite Radio search modes.
See “Basic SIRIUS Satellite Radio™ operations” on 
page 63 for details.

Press F

MEMORY (or 9MEMORY).

The MEMORY indicator flashes in the front panel 
display for approximately 30 seconds.

You must proceed to and carry out steps 3 through 4 while 
the MEMORY indicator is flashing in the front panel 
display.

Press E

PRESET/TUNING/CH l / h 

(or 8

PRESET/CH k / n) repeatedly to select 

a preset channel group and number (A1 to 
E8) while the MEMORY indicator is flashing.
The preset channel number appears in the front panel 
display.

y
You can select the preset station group (A to E) by pressing 
DA/B/C/D/E (or 8A-E/CAT. l / h) repeatedly.

Press F

MEMORY (or 9MEMORY) to set 

the selected SIRIUS Satellite Radio channel 
as a preset channel while the MEMORY 
indicator is flashing.
A colon (:) appears next to the preset channel number 
for confirmation, and the MEMORY indicator turns 
off in the front panel display.

 

Once you set a new preset channel, the one previously stored in 
the same preset channel group and number is cleared.

You can use the Parental Lock feature to limit the access 
to the desired SIRIUS Satellite channels. This unit 
automatically skips the locked channels when this unit is 
in the All Channel Search mode or Category Search mode 
and you search a channel by pressing EPRESET/
TUNING/CH l / h (or 8

PRESET/CH k / n).

■ Setting the code number and the locked 

Use this feature to set the Parental Lock code number 
(PIN) and select the channels to be locked.

Press 5

AMP on the remote control and then 

press M

MENU to display.

Press 8n to select “MANUAL SETUP” and 
then press 8

ENTER.

Press 8n repeatedly to select “INPUT 
MENU” and then press 8

ENTER.

Before performing the following operations, press KSIRIUS 
on the remote control.

001 SIRIUS Hit

A1023 Hair Na

A1:023 Hair Na