Yamaha HTR-6160 User Manual

■ Basic configuration of sound field 

Each sound field program has some parameters defining 
the characteristics of the program. To customize the 
selected sound field program, adjust “DSP LEVEL” and/
or “DIALG.LIFT” first, and then try other parameters.

y
To change sound field parameter settings, see page 72 for details.

Adjusting the effect sound level of the sound 
field programs (DSP LEVEL)
Sound field programs add effect sounds (DSP effect 
sounds) to the original source sound to create sound field 
in the listening room. Use the “DSP LEVEL” parameter to 
adjust the level of the effect sounds.

Adjust “DSP LEVEL” in the following cases:

Increase the value of “DSP LEVEL”
• The effect sound of the selected sound field 

program is too weak.

• You cannot recognize any difference between the 

sound field programs.

Decrease the value of “DSP LEVEL”
• The sound is vague.
• You feel that the additional sound effect is 

excessive.

Control range: –6 dB to +3 dB

Adjusting the vertical dialogue position 
(DIALG.LIFT)
Use this feature to adjust the vertical position of the 
dialogues in movies. The ideal position of the dialogues is 
at the center of the video monitor screen.

If the dialogues are heard at the lower position of the video 
monitor screen, increase the value of “DIALG.LIFT”.

Choices: 0, 1, 2, 3, 4, 5
“0” (initial setting) is the lowest position, and “5” is the 
highest position.

• “DIALG.LIFT” is only available only “EXTRA SP ASSIGN” 

is set to “PRESENCE” (see page 72).

• You cannot move the dialogue position down from the initial 

dialogue position.