Multitech MTCBA-Xx-EN2-GP User Manual
Chapter 3 – Using the Web Management Software
MultiModem rCell User Guide
45
Add Static Routes Group
IP packets destined for the network indicated in the drop down list are routed to the IP address in field pointed to
by the arrow. You can define the networks in the drop down list under the ‘Networks & Services’ tab. The Static
Route page does not display until the network is defined under Networks & Services.
by the arrow. You can define the networks in the drop down list under the ‘Networks & Services’ tab. The Static
Route page does not display until the network is defined under Networks & Services.
Static Route:
Select a static route from the drop down list, and then click Add.
Add Button:
After you click Add, the new route appears in the table.
IP Setup, Remote Configuration Parameters
Remote Configuration Group
To add a network or host for remote configuration:
1.
From the drop down list, select a network or host. Options are Any, LAN, and WAN Interface.
To define more networks or hosts use the Network & Services tab.
2.
Click Add. The network or host is added and appears in the table.
3.
Repeat these steps for all that apply.
4.
To delete Any and WAN Interface in the Options columns after either is added, click Delete.