Multitech MTCBA-Xx-EN2-GP User Manual
Chapter 3 – Using the Web Management Software
74
MultiModem rCell User Guide
Local LAN:
Internal subnet of the local security gateway for which the security services are provided. If the router
acts as a host, configured as None.
Remote Gateway IP:
Interface where the IPSec tunnel ends. In the case of a Road Warrior with a Dynamic IP
address, configure to ANY.
FQDN:
FQDN is a Fully Qualified Domain Name that resolves to the Local Wan IP of the router or in the case of
GRE/IPSEC, it is used to identify the Wan IP of the remote location. This is provided by your ISP or created by you
if you are using a Dynamic DNS service. When FQDN is selected, leave the Remote Gateway IP blank.
if you are using a Dynamic DNS service. When FQDN is selected, leave the Remote Gateway IP blank.
Remote LAN:
Internal subnet of the remote security gateway for which the security services are provided. If the
remote end is the host, set this to None.
UID (Unique Identifier String):
Check the UID box to enable the Local ID and Remote ID. Local ID and Remote ID
are active only when UID is enabled.
Local
ID
Enter a string identifier for the local security gateway.
Remote
ID
Enter a string identifier for the remote security gateway.
NetBIOS Broadcast:
Check this option to enable broadcasts over the connection. It allows computers on the
network to share Microsoft file and printer sharing
information.
Save Button: Click the Save button to save these settings.