OKI 4600 User Manual

Page of 106
B4400/4500/4550/4600  User’s Guide
95
• FEED JAM - paper has entered the printer but failed to 
reach the exit. A typical message indicates a paper jam 
and advises you to open the top cover for access.
• EXIT JAM - paper has reached the exit but has failed to 
exit completely from the printer. A typical message 
indicates an exit jam and advises you to open the top 
cover for access.
Input jam
1.
Remove the paper tray from the printer.
2.
Remove any crumpled or folded paper.
3.
Remove any paper from the underside of the printer.
4.
Replace the paper tray. 
After successful removal of any damaged or misfed paper, the 
printer should continue printing.
Feed jam or exit jam
1.
Remove the tray and clear any misfed sheets as given 
above.
2.
Open the top cover.
WARNING! The fuser area will be hot. This area is clearly 
marked. Do not touch it.
CAUTION! Never expose the image drum unit to light for more 
than 5 minutes. Never expose the image drum unit to direct 
sunlight. Always hold the image drum unit by the ends or from 
the top. Never touch the surface of the green drum inside the 
image drum unit.
1.
Carefully lift out the image drum, complete with the 
toner cartridge. Be careful not to touch or scratch the 
green drum surface.
2.
Remove any jammed sheets from the paper path.
3.
Re-install the image drum complete with toner cartridge, 
ensuring that it correctly locates into the slots on each 
side of the printer.
4.
Close the top cover and press down to latch it closed.
5.
The printer will warm up and commence printing when 
ready. The page lost through the jam will normally be 
reprinted.