3com 2200 User Manual

C

HAPTER

 12: C

REATING

 

AND

 U

SING

 P

ACKET 

F

ILTERS

When you list the packet filters for the system, the filter identification, filter 
name (if any), and filter assignments are displayed. 

To list the currently defined packet filters, enter the following from the top 
level of the Administration Console:

The listing of packet filters is displayed. An example of the output follows:

Ethernet Packet Filters

Packet Filter 1 - Receive OUI 08-00-1E

Port 4, Transmit Multicast

Port 3, Transmit Multicast

Port 3, Receive Multicast

Port 5, Receive Multicast

Packet Filter 2 - Type > 900 or Multicast

Port 6, Receive All

Port 8, Transmit All

Port 8, Receive All

Packet Filter 3 - Forward IP packets only

No port assignments

In this example, there are two packet filters on the system. The first packet 
filter has a filter id of 1 and a user-defined name of “Receive OUI 08-00-1E.” 
This filter is loaded onto ports 4, 3, and 5. On port 3, the filter is assigned to 
both the transmit multicast and receive multicast paths. 

The second filter (filter id 2, user name “Type > 900 or Multicast”) is assigned 
to ports 6 and 8. The filter is assigned to both the receive all and transmit all 
paths of port 8. 

system
ethernet
fddi

➧

bridge
ip
snmp
analyzer
script
logout

display
ipFragmentation
ipxSnapTranslation
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTime
stpForwardDelay
stpGroupAddress
port

➧

packetFilter

➧

list
display
create
delete
edit
load
assign
unassign
addressGroup
portGroup