3com 2200 User Manual
2-2
C
HAPTER
2: H
OW
TO
U
SE
THE
A
DMINISTRATION
C
ONSOLE
Each time you access the Administration Console, the system prompts you
for an access level and password, as shown here:
for an access level and password, as shown here:
Select access level (read, write, administer):
Password:
The passwords are stored in nonvolatile (NV) memory. You must enter the
password correctly before you are allowed to continue.
password correctly before you are allowed to continue.
The following examples show how the top-level menu structure changes
based on the level of access. For information about setting passwords, see
page 4-2.
based on the level of access. For information about setting passwords, see
page 4-2.
Administer Access
Example
If you have administer access, each menu contains all options. Here is the
system menu for users with administer access:
system menu for users with administer access:
Menu options: ------------------------------------------------------------------
display
- Display the system configuration
softwareUpdate
- Load a new revision of system software
baseline
- Administer a statistics baseline
consoleSpeed
- Set the console serial port baud rate
telnet
- Administer telnet sessions
password
- Set the console passwords
name
- Set the system name
time
- Set the date and time
screenHeight
- Set the console screen height
consoleLock
- Allow/Disallow remote access to the console
ctlKeys
- Enable/Disable Ctl-X (reboot) and Ctl-C (abort)
nvData
- Save, restore, or reset nonvolatile data
reboot
- Reboot the system
Type ‘q’ to return to the previous menu or ? for help.
--------------------------------------------------------------------------------
Select a menu option (system):
Write Access
Example
If you have write access, the system menu contains a subset of the
complete menu, focusing on the network, as shown here:
complete menu, focusing on the network, as shown here:
Menu options: ------------------------------------------------------------------
display
- Display the system configuration
baseline
- Administer statistics baseline
consoleSpeed
- Set the console serial port baud rate
name
- Set the system
screenHeight
- Set the console screen height
Type ‘q’ to return to the previous menu or ? for help.
--------------------------------------------------------------------------------
Select a menu option (system):