3com 2200 User Manual

C

HAPTER

 3: C

ONFIGURING

 M

ANAGEMENT

 A

CCESS

 

TO

 

THE

 S

YSTEM

3 Enter the trap number(s).

Separate a series of more than two trap numbers with a hyphen (-) and 
nonsequential trap numbers by commas. Enter 

 if you want to enable all 

the traps for the destination.

This example shows a trap configuration:

Enter the trap destination address: 

Enter the trap numbers to enable (1-5,10,12-22|all) 

[1-5,10,12-22]: 

If the destination address you entered is not a valid end-station or if the 
agent does not have a route to the destination, you receive this message:

Trap address invalid or unreachable

If you see this message, confirm the address of the end-station and confirm 
that it is online.

When you remove a destination, no SNMP traps will be reported to that 
destination. 

To remove a destination:

1 From the top level of the Administration Console, enter:

You are prompted for a trap destination address, that is, the IP address of 
the SNMP manager that will no longer receive the traps.

2 Enter the SNMP trap reporting destination address you want to remove.

The destination address is removed and you return to the previous menu.

system
ethernet
fddi
bridge
ip

➧

snmp
analyzer
script
logout

display
community

➧

trap

display
addModify

➧

remove
flush
smtProxyTraps