Radio Shack HTX-200 User Manual
22
A QUICK LOOK AT THE DISPLAY
1. F: appears when the FUNC key is pressed.
2. TX: appears when the radio is transmitting.
3. BUSY: appears when the radio receives a signal.
4. CALL: appears when tone squelch is on and the radio receives a
matching tone.
5.
: indicates the battery strength.
6. S-RF (Signal/RF Indicator): shows the level of an incoming signal.
When transmitting, shows the relative output signal strength.
7. BAT: appears when you turn on the radio — the signal strength
meter then indicates the battery strength.
8.
: the stronger the signal, the more boxes appear.
Bars show remaining battery power when MO and PTT switch are
held down at the same time.
held down at the same time.
9. Alpha-Numeric Display: shows frequency and messages.
10. Memory Location: shows the memory channel in use.
11. MR (Memory Channel indicator): for use or for programming.
12.
: paging tone active.
13.
: key tone enabled.
14.
: keypad control disabled to prevent accidentally
changing a setting.
15. PS: appears when power save is enabled.
16. TSQ: appears when Tone Squelch (CTCSS) is enabled.
17.
ã
: appears to indicate a positive repeater offset. – indicates a nega-
tive repeater offset.
1
2
3
4
5
6
7
8
9 10 11
12
13
14
15
16
17
19-1102RPO.fm Page 22 Friday, June 25, 1999 11:17 AM