Nilfisk Alto 590 User Manual

Page 8

 Model 590/590B Operator's Manual

The handle on the 590 has a storage and an operating
position.  To change the position of the handle, use
the two knobs on the handle.  See figure 1

To put the handle in the storage position, pull out the
two knobs.  Rotate the knobs ¼ turn.  Put the handle
forward in the storage position.

To put the handle in the operating position rotate the
knobs to the lock position.  Put the handle in the
operating position.

Make sure the filter bag is empty and clean before you
install the bag and begin to use the machine.  Use the
zipper (1) on the bag to remove the contents of the
bag. See figure 2.

To install the filter bag, put the opening (2) in the bag
around the lip (3) that holds the bag.  Tighten the strap
(4) to hold the bag in position.  See figure 2

Figure 1

Figure 2