Nilfisk Alto 8 GALLON AE User Manual
ATTIX 8 GALLON
ATTIX 8 GALLON AS/E
7
english
4 Operation
4.1
Connections
4.1.1 Connecting the suction
hose
1. Connect the suction hose.
4.1.2 Electrical connection
The operating voltage shown on
the rating plate must corres-
pond to the voltage of the
mains power supply.
the rating plate must corres-
pond to the voltage of the
mains power supply.
1. Ensure that the cleaner is
switched off.
2. Insert the power cord into a
properly installed and fused
socket with earthing contact.
socket with earthing contact.
4.1.3 Connecting power
tools
1)
To comply with regulations, only
approved dust producing tools
should be connected.
approved dust producing tools
should be connected.
5. Fit the suction tube fastener
about 20 cm from the edge
of the lower extension tube
as shown in the figure.
of the lower extension tube
as shown in the figure.
1)
Option depending on model
The maximum power consump-
tion of the connected power tool
is stated in section 9.4 "Techni-
cal data".
tion of the connected power tool
is stated in section 9.4 "Techni-
cal data".
1. Ensure that the power tool
is switched off.
2. Connect the power tool to
the appliance socket
1)
on the
control panel.