Riccar RCU-H3 User Manual
13
Installation
Low Voltage Connections
Connect the low voltage wires to the low voltage inlet on your unit.
To do so:
1. Strip wires over 1 cm (1/2 inch)
1. Strip wires over 1 cm (1/2 inch)
(figure 10).
2. Gently press on the toggle to open the connector
(figure 11).
3. Insert stripped wire
(figure 12).
4. Release toggle to secure wir e in connector
(figure 13).
5. Repeat for second wire.
To disconnect:
1. Gently press on the toggle to open the connector.
2. Remove low voltage wire fr om connector.
1. Gently press on the toggle to open the connector.
2. Remove low voltage wire fr om connector.
LED
Except H9 &
H11 models
details on
page 15