Roberts Radio RD-6R User Manual
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
8
Finding new stations - DAB
As time passes new stations may become available. To find new stations
proceed as follows:-
proceed as follows:-
1.
Press and release the AutoTune button, the display will show
"Autotune Quick Scan". Your radio will perform a scan of the UK DAB
frequencies. As new stations are found the station counter on the
right-hand side of the display will increase and stations will be added
to the list
"Autotune Quick Scan". Your radio will perform a scan of the UK DAB
frequencies. As new stations are found the station counter on the
right-hand side of the display will increase and stations will be added
to the list
2.
To carry out a full scan of the entire DAB Band III frequencies press
and hold down the AutoTune button for more than 2 seconds and
then release. The display will show "Autotune Full scan". As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list
and hold down the AutoTune button for more than 2 seconds and
then release. The display will show "Autotune Full scan". As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list
Autoselect - DAB
As an alternative to pressing the tuning control to select a station your
radio can be set so as to automatically select a station.
radio can be set so as to automatically select a station.
1.
Rotate the Tuning control a few clicks in either direction, immedi-
ately press and hold in the tuning control until the display shows
"Autoselect ON".
ately press and hold in the tuning control until the display shows
"Autoselect ON".
2.
Rotate the Tuning control until the station you require is visible on
the display, after a few seconds your radio will automatically select
the station shown on the display.
the display, after a few seconds your radio will automatically select
the station shown on the display.
3.
To switch off Autoselect rotate the Tuning control a few clicks in
either direction, immediately press and hold in the Tuning control
until the display shows "Autoselect OFF".
either direction, immediately press and hold in the Tuning control
until the display shows "Autoselect OFF".
1
2
1