Roberts Radio RDK-2 User Manual
17
Dynamic Range Control (DRC) settings - DAB
The DRC facility can make quieter sounds easier to hear when your radio
is used in a noisy environment.
is used in a noisy environment.
1. Touch
the
On/Standby button to switch on your radio.
2. Touch
the
Info button for 2-3 seconds until the display shows “Station
order.”
3. Touch
the
Tuning Up/Down button until the display shows "DRC
value".
4. Touch
the
Select button to enter adjustment mode.
5. Touch
the
Tuning Up/Down button to select required DRC setting
(default is 0) .
DRC 0 DRC is switched off, broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6. Touch the Select button to confi rm the setting. The display will return
to radio mode.
Note: Not all DAB broadcasts use the DRC function. If the broadcast
does not provide DRC information, then the DRC setting in the radio will
have no effect.
does not provide DRC information, then the DRC setting in the radio will
have no effect.
2
1
3,5
3,5
4,6