JVC GV-LS2 U User Manual
30
Preparation
Connecting to the camera
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWE
R
Attaching to the hot shoe
1
Remove the hot shoe cover.
2
Attach the mic.
Connecting to the pantilter
MIC
POWER
PLUG IN
AV
DC
EXTEND
Connecting an External Mic
Connect an external mic to record external sounds.
Connect a commercially available mic to the MIC terminal of the pantilter when it is attached, or of the camera when
not attached.
Connect a commercially available mic to the MIC terminal of the pantilter when it is attached, or of the camera when
not attached.
• Use the plug-in power type.
• Do not use microphone with L-shaped connectors.
• Turn off the power before connecting/disconnecting the mic.
• Without an external mic, the internal mic can record ambient sounds.
• When the sounds are too loud or too low, change the "MIC LEVEL SETTING". ( ➭ page 45)
• Do not use microphone with L-shaped connectors.
• Turn off the power before connecting/disconnecting the mic.
• Without an external mic, the internal mic can record ambient sounds.
• When the sounds are too loud or too low, change the "MIC LEVEL SETTING". ( ➭ page 45)
Mic (commercially available)
f3.5 mm stereo mic jack
f3.5 mm stereo mic jack
Mic (commercially available)
f3.5 mm stereo mic jack
f3.5 mm stereo mic jack