Cirkuit Planet ICA-108W User Manual

                                                                                                 

There is a button hidden in the pinhole near to the DC power connector. This button is used to 
restore the factory default settings. Sometimes restarting the ICA-108/108W will make the system 
back to a normal state. If the system still got problems after reset, user can restore the factory 
default settings and install it again. 

Restore the ICA-108/108W:   

1.  Insert the paper clip or other tool and press and hold the button down continuously. 

2.  Wait at least 3 seconds and release the button. Then the ICA-108/108W has been 

restored to factory default settings and reboot again.   

 

                                                                                      Reset to Factory Default 

Note:  Restoring the factory default setting will lose the all previous settings included IP 

address forever. User will need to run the IPWizard program to search the device and 
configure it to let the device work properly again. 

 

 65