Makita GA4043C User Manual

P 9/ 14 

(3) Disassemble Ball bearing 6201DDW from Bearing box as drawn in Fig. 9.
Fig. 9

ASSEMBLING

Assemble by reversing the disassembly procedure. (Refer to Figs. 9, 8 and 7)
Note: • Do not re-use the removed Joint sleeve. New Joint sleeve has to be mounted. 

            (Refer to the bottom center illustration in Fig. 7)

          • Apply the following thread locker to the thread of M4x16 Hex socket head bolts if the unscrewed bolts are used.

             * Three Bond 1342

            (Refer to the upper left illustration in Fig. 7)

          • Coupling, large Spiral bevel gear, Ball bearing 6903ZZ have to be assembled tightly that there is any gaps

            among them.  See the left illustration in Fig. 10.  

          

Incomplete assembling causes gaps.

DISASSEMBLING

1. Clamp Bearing box with Vise. Then, while fitting the claw of 1R340 to the notch of Bearing retainer 20-33, 

    turn 1R340 clockwise to remove the retainer. 

2. Take out Felt ring 17 and Flat washer 21

    from Lead flange side of Bearing box. 

3. Remove Ball bearing 6201DDW with Arbor press. 

1R340

Bearing 

retainer 20-33

Bearing 

retainer 20-33

Felt ring 17

Arbor press

Felt ring 17

Flat washer 21

Ball bearing 

6201DDW

Ball bearing 

6201DDW