Hobart FD3-300 User Manual
Item # _____________________________________
Quantity ___________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-8560 – FD3-150 FD3-200 FD3-300 Foodwaste Disposers
Page 1 of 4
FD3-150 FD3-200 FD3-300
FOODWASTE DISPOSERS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
FD3-150
FD3-200
FD3-300 FOODW
ASTE DISPOSERS
R
MOTOR SHAFT SEAL: Face-type seal consists
of sintered bronze mating ring and spring loaded
carbon ring insert in chemical resistant neoprene
bellows. Mating surfaces are protected from grit or
fibers by being recessed into flywheel. Should any
moisture pass this seal, a flinger and drain tube
are provided to insure immediate removal. In
addition, a lip-type oil seal (located beneath the
bearings) is an “added protection” water seal.
of sintered bronze mating ring and spring loaded
carbon ring insert in chemical resistant neoprene
bellows. Mating surfaces are protected from grit or
fibers by being recessed into flywheel. Should any
moisture pass this seal, a flinger and drain tube
are provided to insure immediate removal. In
addition, a lip-type oil seal (located beneath the
bearings) is an “added protection” water seal.
DRAIN CONNECTOR: The removable outlet
flange is tapped for 2” pipe connection.
flange is tapped for 2” pipe connection.
DUAL DIRECTIONAL GRINDING: Hobart
Disposers operate in either direction of flywheel
rotation. Direction of rotation can be controlled by
the operator (to increase life and efficiency of
grinding elements – back flywheel free of a “jam”)
when installed with Control Groups 2 or 3.
Disposers operate in either direction of flywheel
rotation. Direction of rotation can be controlled by
the operator (to increase life and efficiency of
grinding elements – back flywheel free of a “jam”)
when installed with Control Groups 2 or 3.
WEIGHT: Shipping – Approx. 95 lbs. (does not
include accessory group or controls).
include accessory group or controls).
MEDIUM SIZE
FAST, ECONOMICAL
In a profitable foodservice operation, there’s no
space, time or budget allowance for inefficient
food waste handling. Here are the medium sized
disposers that can end food waste storage,
removal and clean-up – fast, economically.
space, time or budget allowance for inefficient
food waste handling. Here are the medium sized
disposers that can end food waste storage,
removal and clean-up – fast, economically.
SPECIFICATIONS
Listed by Underwriters Laboratories Inc. and meets requirements of
A.S.S.E.Standard No. 1009 (50 Hz. Electrical Specifications not U L
Listed).
A.S.S.E.Standard No. 1009 (50 Hz. Electrical Specifications not U L
Listed).
MOTORS: Continuous duty rating, equipped with
manual reset thermal overload inherent protection.
Permanently lubricated ball bearings for upper and
lower shaft support.
manual reset thermal overload inherent protection.
Permanently lubricated ball bearings for upper and
lower shaft support.
HOUSINGS: Heavy aluminum grind and discharge
housings. Four bolts fasten the motor unit to the
grind chamber, permit easy removal.
housings. Four bolts fasten the motor unit to the
grind chamber, permit easy removal.
LEGS: Tubular stainless steel with bullet feet to
support housing. Adjustable to 3 inches in either
direction.
support housing. Adjustable to 3 inches in either
direction.
MOUNTING: All Hobart Disposers fasten to 7" I.D.
(throat opening) cones. A vinyl isolating ring
eliminates metal-to-metal contact at the cone
mounting, reduces vibration and noise
transmission.
(throat opening) cones. A vinyl isolating ring
eliminates metal-to-metal contact at the cone
mounting, reduces vibration and noise
transmission.
STATIONARY SHREDDER RING: Abrasion
resistant, Ni-Hard, 2
resistant, Ni-Hard, 2
1
⁄
4
" high, 4 machine ground
primary action breaker bars, 42 secondary action
grinding teeth.
grinding teeth.
FLYWHEEL: Offset breaker blade, mounted at
center, speeds grinding, prevents objects from
“riding” at center. Two hardened stainless steel
cutter blocks (fastened to flywheel with nylon
locking screws) are replaceable, can be indexed
for new cutting edges. Corrosion resistant
Ni-Resist flywheel is 7
center, speeds grinding, prevents objects from
“riding” at center. Two hardened stainless steel
cutter blocks (fastened to flywheel with nylon
locking screws) are replaceable, can be indexed
for new cutting edges. Corrosion resistant
Ni-Resist flywheel is 7
3
⁄
16
” diameter, slots undercut
the shredder ring to assure that particles are cut to
proper size before passing to the drain line.
proper size before passing to the drain line.