Hoshizaki KMD-450MAH User Manual

15) Replace the front panel in its correct position.
16) Clean the dispenser unit/storage bin liner using a neutral cleaner. Rinse thoroughly 

after cleaning.

17) Turn on the power supply to start the automatic icemaking process.

This icemaker must be maintained individually, referring to the instruction manual and 
labels provided with the icemaker.

1. Only qualified service technicians should attempt to service or maintain this 

icemaker.

. Disconnect power before performing service or maintenance.

To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp 
cloth containing a neutral cleaner to wipe off oil or dirt buildup.

• Wash your hands before removing ice. Use the plastic scoop provided (bin accessory).
• The dispenser unit/storage bin is for ice use only. Do not store anything else in the 

dispenser unit/storage bin.

• Clean the scoop and the dispenser unit/storage bin liner using a neutral cleaner. Rinse 

thoroughly after cleaning.

Plastic mesh air filters remove dirt and dust from the air, and keep the condenser from 
getting clogged. As the filters get clogged, the icemaker’s performance will be reduced. 
Check the filters at least twice a month. When clogged, use warm water and a neutral 
cleaner to wash the filters.

Check the condenser once a year, and clean the coil if required by using a brush or 
vacuum cleaner. More frequent cleaning may be required depending on location.