Philips CE139DR/05 User Manual
24 EN
13 Troubleshooting
Warning
•
Never remove the casing of this product.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
product, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the product is nearby and the
model number and serial number are available.
No power or no sound
No power or no sound
• The power supply from car battery is cut
off, or the car battery runs out of energy.
Power the system with car battery.
• Car engine is not on. Turn the car engine
on.
• Cable is not correctly connected. Check
connections.
• The fuse is burnt. Replace the fuse.
• Volume is too low. Adjust volume.
• If the above solutions cannot help, press
the RESET button.
• Make sure that the current track is in a
compatible format.
Noise in broadcasts
• Signals are too weak. Select other stations
with stronger signals.
• Check the connection of the car antenna.
• Change the broadcast setting from stereo
to mono.
Preset stations are erased.
• Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Cannot switch the source to iPod/iPhone
• Check whether the iPod/iPhone is securely
connected.
• Check whether the iPod/iPhone is
compatible with this system.
• Check whether the iPod/iPhone battery is
nearly empty. Connect it to this system for
charging first.
Cannot switch the source to [DAB/DAB+]
• Check whether the DAB radio receiver is
securely connected.
enabled (see ‘Disable the DAB reception’
Display shows ERR-12.
• Data error. Check the USB storage device
or SD/SDHC card.