Technoline Radio Controlled Alarm Clock with Projection WT 590 User Manual
Product codes
WT 590
3.
Once the alarm time is set, press the SNOOZE key to confirm and exit or wait approximately 8
seconds for automatic timeout.
seconds for automatic timeout.
TO ACTIVATE / DEACTIVATE THE ALARM:
Press the AL/HR key. The alarm icon (((
•))) will appear/disappear indicating that it is ON or OFF.
Note: the maximum duration of the alarm ringing is 1 minute 36 seconds.
SNOOZE SETTING:
The snooze time is set as default for 5 minutes by the manufacturer. The snooze mode will be activated from
the start of next minute after the SNOOZE key was pressed – it does not count the current minute that it was
pressed in.
the start of next minute after the SNOOZE key was pressed – it does not count the current minute that it was
pressed in.
To use the snooze feature, simply press the SNOOZE key when the alarm is sounding and the alarm will
snooze for 5 minutes before automatically sounding again. When the alarm is snoozing, the alarm icon (((
snooze for 5 minutes before automatically sounding again. When the alarm is snoozing, the alarm icon (((
•)))
will start flashing indicating that the alarm is active but is in Snooze mode.
Press the AL/HR key or the MODE/MIN key once to stop the snooze function.
LCD SCREEN
The Projection clock can display information of date, indoor temperature, seconds and alarm time on
the LCD only. The projection will only display the time.
the LCD only. The projection will only display the time.
The clock LCD can alternate between the 4 display modes when pressing and the MODE/MIN key:
23