Philips HTS6500/55 User Manual

39

(underlined options are the factory default settings)

HDMI Audio 

This setting is only required if you are using the DVD system’s 

HDMI OUT jack to connect your TV or other display device (see 
‘Option4: Connecting to a HDMI-compatible TV’). 

 

 Note: It may take a while for the DVD system and the input device 

to communicate and initialize.

{ Off } 

–  Select this if the playback audio format is not 

supported by HDMI connection (e.g. 
projector, SACD). It will turn off the HDMI 
audio output.

{ PCM } 

–  Select this to downmix the audio signals to 

linear-PCM (2-channel). 

{ All } 

–  Select this to enjoy the multi-channel audio 

output through the HDMI connection.  

Note: It is not possible to listen to SACDs or copy-controlled DVD-
Audio CPPM (Content Protection for Playable Media) sources using the 
HDMI connection.

Night Mode 

This mode optimizes playback of sound at low volume. High 

volume outputs will be softened and low volume outputs will be 
enhanced to an audible level. This feature is only applicable for 
DVD video discs with Dolby Digital mode.

{ On } 

–  Turns on night mode.

{  Off } 

–  Turns off night mode feature. Selects this to 

enjoy the surround sound with its full 
dynamic range.

Lip Sync 

This feature allows you to adjust the audio delay times if the 

video playback is slower than the audio output streams, hence 
resulting in lip-sync.

 

Access the lip sync setup menu. Use     keys to set the delay 

times (0 ~ 200 ms) for the audio output.