ECS A740GM-M User Manual

33

Using BIOS

Press <Esc> to return to the main menu setting page.

Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.

Use this item to enable or disable the USB function.

Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).

Use this item to assign a DMA channel to the parallel port.

Use this item to assign IRQ to the parallel port.

This page sets up some parameters for system power management operation.

Select the ACPI
state used for
System Suspend.

Help Item

CMOS Setup Utility - Copyright  (C)  1985-2007, American Megatrends, Inc.

              Power Management Setup

ACPI Suspend Type

  S3 (STR)

Soft-off by PWR-BTTN

Instant Off

PWRON After PWR-Fail

 Power Off

Resume by Ring

Disabled

Resume By PCI/PCI-E/Lan PME

 Disabled

Resume by USB (S3)

Disabled

Resume By PS2 KB (S3)

Disabled

Resume By PS2 MS (S3)

Disabled

Resume on RTC Alarm

 Disabled

F10: Save      ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

: Move

mnlk

Use this item to define how your system suspends. In the default, S3, the suspend
mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh
current to the system memory.