Philips PPF650E/GBB User Manual

Connecting the Telephone Cable

Connecting the Telephone Cable

Connect the telephone cable to the device by inserting it in
the socket designated with LINE (RJ-11-Connector).
Insert the telephone plug into your PTT line socket.

Connecting the Telephone Cable

PABX Systems 1

Two-pin

When connecting to the telephone line socket, use only a
two-pin

 RJ-11-telephone cable (modular plug). The use

of a four-pin telephone cable may lead to the device not
functioning correctly.

Mains Voltage at the Site of Installation

Device Mains Cable

Connecting the Mains Cable

Insert the mains cable into the connection located on the
rear side of the device. Plug the power cable into the elec-
trical outlet.

Connecting the Power Cable

Charging Station Mains Cable

Connect the mains cable of the charging station to the
electrical socket.

Ladestation anschließen

Starting Initial Installation

After you connect your device to the mains voltage, the ini-
tial installation commences. Press i. Your device prints a
help page.

Use [ to select the desired display language.

Confirm with OK.

Analogue Fax Machine
Your device is an analogue fax device (Group 3).
It is not an ISDN device (Group 4), and there-
fore it cannot be operated directly on an ISDN
connection. In order to do this, you need either
an analogue adapter or a connection for ana-
logue terminals.

Connection to Private Automatic 
Branch Exchange
If you connect your device as extension to a tel-
ephone system, you must set it for working as an
extension (also see Chapter 

Telephone connec-

tions and additional devices

Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device
(indicated on the type label) matches the mains
voltage available at the setup location.