Philips LFF6080/GBB User Manual

- 66 -

This tab shows the list of devices managed by the PC.

Make sure that your multifunction machine is powered off. 
The connection between the PC and the machine 
requires a USB 2.0 shielded cable no more than 3 meters 
long.

1 Locate your USB cable connectors and connect as 

shown below on the picture.

2 Power on your multifunction machine.

 

The PC detects the device and  the drivers are 
automatically installed.

3 Once the installation is finished, a message 

indicates that the drivers are installed correctly.

You can now use the multifunction machine to print or 
scan your documents.

You may connect your multifunction terminal to an 
Ethernet or a wireless network.

1 Run the Companion Monitor application by clicking 

on the icon located on your desktop or from the 
menu S

.

2 Click the plus sign or A

 button.

3 The list of devices detected on the network 

appears. Click on R

 to update the list.

 

Detected devices appear with the following 
information:

4 NetBIOS name (hardware identifier) or IP address 

(device’s identifier on the network).

5 Network name (user-defined). To define the name 

of a device on the local network, refer to paragraph 
Network features, page 47.

6 Select your multifunction machine and click OK.
7 Enter a registration name for your PC and click OK. 

The multifunction machine will use this name to 
identify your PC.