Philips LFF6050/GBB User Manual

- 33 -

1 Press  , enter 252 using the keypad.
2 Enter the required minimal SIZE NUMBER of the 

company’s outside numbers and confirm with OK. 

 

The minimal size will range between 1 and 30.

3 Enter the required outgoing local PREFIX of the 

company’s telephone network (maximum 10 
characters) and confirm with OK.

4 To exit this menu, press 

.

You may print a transmission report for all 
communications over the telephone network (PSTN).

You may choose between more than one criteria for 
printing reports:
• ON: a report is given when the transmission was 

properly performed or when it is completely 
abandoned (but there is only one report per request),

• OFF: no transmission report, however, your fax will 

note all transmissions that took place in its log,

• ALWAYS: a report is printed with each transmission,
• ON ERROR: a report is printed only if the transmission 

failed or is abandoned.

With each transmission report from memory, a reduced 
version of the first page is automatically reproduced.

To select the report type:

1 Press  , enter 231 using the keypad.
2 Select the required option ON, OFF, ALWAYS or 

ON ERROR and confirm your choice with OK.

3 To exit this menu, press 

.

You may choose the way you want to feed your 
documents:
• from memory, transmission will take place only after 

memory storage of the document and dialling.

 

It allows you to get your originals back quickly to free 
up the machine.

• from the feeder of the sheet-feed scanner, 

transmission will occur after dialling and paper 
scanning. It allows transmission of larger documents.

To select the way you want to feed your documents:

1 Press  , enter 232 using the keypad.
2 Select the option MEMORY or FEEDER and 

confirm your choice with OK.

 

In feeder mode, reduced images will not appear on 
the transmission report.

3 To exit this menu, press 

.

This function allows you to defer a fax transmission to "off-
peak hours" and thus reduce the cost of your 
communications.

The economy period, via the telephone network (at off-
peak hours), is preset by default from 7.00 pm to 7.30 am. 
Nevertheless you may change this time slot.

To modify the economy period:

1 Press  , enter 233 using the keypad.
2 Enter the hours of the new economy period (for 

example 19:00-07:30) and confirm your choice 
with OK.

3 To exit this menu, press 

.

To use the economy period:

1 Select  32 - FAX / ECO TRANS.
2 Enter the call number and confirm with OK.
3 Adjust the contrast and confirm with OK.
4 Select the feed type, FEEDER or MEMORY and 

confirm with OK.

5 You may enter the number of pages before 

transmission and confirm with OK.

6 If you are using the flatbed scanner, you can scan 

more than one page. Place the next page on the 
scanner, select NEXT and confirm with OK. Select 
DONE when all pages have been scanned.