Philips LFF6050/GBB User Manual

- 77 -

Code 06 - Printer default
An incident occurred in the printer: no paper, paper jam, 
opened cover... In the reception mode, this incident 
appears only if the reception parameter is switched to 
W

.

Code 07 - Disconnected
The link has been cut (bad line). Check the number and 
try again.
Code 08 - Quality
The document you sent was not well received. Contact 
your subscriber to see if you need to send again.
Code 0A - No document to be polled
You tried to poll a document from a subscriber who had 
not prepared his/her document (no deposit) or the 
password entered was incorrect.
Code 0B - Wrong number of pages
There is a difference between the number of pages 
indicated during preparation for the transmission and the 
number of pages sent. Check the number of pages in the 
document.
Code 0C - Received document error
Ask the subscriber who called you to check the length of 
his/her document (it may be too long to be completely 
received).
Code 0D - Transmission failed
Ask the sender to resend the document.
Code 13 - Memory full
Your fax can no longer receive since its memory is full. 
There are too many received unprinted documents or too 
many documents in the transmission line.
Print the received documents and delete or transmit 
immediately the documents in the transmission line.
Code 14 - Memory full
Received document memory full. Print all received 
documents.
Code 15 - Unknown mailbox number
You wish to deposit a document in a subscriber’s mailbox. 
The mailbox number does not exist.
Code 16 - No Relay Bcst list Nr x
You requested a document relay from a remote fax but 
the fax has not programmed the list of subscribers 
requested.
Code 17 - Unknown mailbox number
You wish to recover a document from a subscriber’s 
mailbox. The mailbox number does not exist.
Code 18 - Relay Bcst impossible
You requested a document relay from a remote fax which 
does not have the relay broadcast function.
Code 19 - Subscriber has stopped
The communication has been stopped by your 
subscriber. (Example: a fax wanted to poll your fax but 
there is no document deposited).
Code 1A - Disconnected
The transmission has not started. The telephone line is 
busy.
Code 1B - Transmission failed
During transmission: start again.
During reception: ask your subscriber to resend the 
document.
Code 50 - Server error
Check the number configured for the SMS server or a 
communication error occurred during data transmission.

This section details how the machine handles a print 
request after having encountered an issue (paper jam, 
connection loss, etc.).

Refer to the sections below to know if the printing of your 
document will resume or will be cancelled, depending on:
• the connection to the PC,
• the problem encountered during printing.

Paper empty

Once the problem is resolved, 
printing resumes from the first 
non-printed page.

No paper feed

Once the problem is resolved, 
printing resumes from the first 
non-printed page.
Exception: If the document 
was to be printed in manual 
duplex mode, the printing of 
the document is cancelled.

Paper jam

Paper format problem

Toner empty

The printing of the active 
document is cancelled. 
Documents waiting to be 
printed, however, will print 
after the toner cartridge is 
replaced.

Pause requested 
from the spooler

The machine switches to idle 
mode after a timeout (30 
seconds by default).

 

The printing of the active 
document is cancelled. 
Documents waiting to be 
printed, however, will be 
printed.

Loss of USB 
connection

Once the problem is resolved, 
the printing of the document 
restarts from the beginning, 
regardless of the number of 
pages already printed before 
the connection loss.