Philips DVP3126K/93 User Manual
English
34
Digital Output
Select this if you connect to a
multichannel decoder/receiver.
multichannel decoder/receiver.
A
In ‘Audio’, press S T to select { Digital
Output }, then press X.
{
All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{
PCM }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{
Off }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
B
Use S T to select a setting and press
OK to confi rm.
Tips:
– If { Digital Output } is set to { All }, all
audio settings except MUTE are invalid.
– If { Digital Output } is set to { All } while
playback MPEG, MP3/WMA fi les, the player
will output PCM signals.
– If { Digital Output } is set to { All }, all
audio settings except MUTE are invalid.
– If { Digital Output } is set to { All } while
playback MPEG, MP3/WMA fi les, the player
will output PCM signals.
DVD Menu Options
(continued)
TIPS:
The underlined option is the factory default setting.
Press
W to go back to previous menu item. Press SETUP to exit the menu item.
Night Mode
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A
In ‘Audio’, press S T to select { Night
Mode }, then press X.
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
B
Use S T to select a setting and press
OK to confi rm.
Down Sampling
You can enable and disable the digital
signal for better sound output quality.
signal for better sound output quality.
A
In ‘Audio’, press S T to select { Down
Sampling }, then press X.
{ On }
Playback a disc recorded at the sampling
rate of 48kHz.
Playback a disc recorded at the sampling
rate of 48kHz.
{ Off }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
B
Use S T to select a setting and press
OK to confi rm.
01-43_dvp3126K_93_eng1.indd 34
01-43_dvp3126K_93_eng1.indd 34
2007-02-12 1:49:20 PM
2007-02-12 1:49:20 PM