AOC LE22H067 User Manual

Page of 37
5
LCD/LED Screen
Although the LCD/LED screen is made with high-precision 
technology and has effective pixels of 99.99% or more, black dots 
or bright points of light (red, blue, or green) may appear constantly 
on the LCD/LED screen. This is a structural property of the LCD/
LED panel and is not a malfunction. 
The LCD/LED screen is made with high-precision technology and 
to achieve a high level of performance and picture quality, this 
TV’s backlight setting is set to maximize the brightness of the TV. 
However, uneven brightness may be observed when the HDTV 
is viewed in a dark ambient without an input source or a blank 
screen. This condition is normal and not a malfunction of the TV. 
Changing the Picture mode, Backlight setting, enabling the Light 
Sensor, or turning on the Power management will improve this 
condition. 
Do not expose the LCD/LED screen surface to direct sunlight. 
Doing so may damage the LCD/LED panel. 
Do not push or scratch the LCD/LED screen, or place objects on 
top of the TV. The image may be uneven or the LCD/LED panel 
may be damaged. 
If the TV is used in a cold place, a smear may occur in the picture 
or the picture may become dark. This does not indicate a failure. 
These phenomena improve as the temperature rises. 
Ghosting may occur when still pictures are displayed continuously. 
It should disappear after a few moments. 
The screen and cabinet get warm when the TV is in use. This is 
not a malfunction. 
Avoid spraying insect repellent with volatile material on the 
screen. 
Avoid prolonged contact with rubber or plastic material. 
Broken Pieces 
Do not throw anything at the TV. The screen glass may break by the 
impact and cause serious injury.
If the surface of the TV cracks, do not touch it until you have 
unplugged the AC power cord. Otherwise electric shock may result. 
Handling of broken glass and liquid crystal leakage 
If the LCD/LED panel gets damaged, crystalline liquid leakage may 
occur, or scattered broken glass may result. Do not touch broken 
glass or crystalline liquid which is toxic, with bare hands as cuts, 
poisoning or skin irritation may occur. Also, do not let glass fragments 
or leaked crystalline liquid get into your eyes or mouth. Should either 
contact your eyes or mouth, rinse the contacted area thoroughly with 
water and consult your doctor. 
Wiring 
When connecting cables, be sure to unplug the AC power cord for 
your safety. Take care not to catch your feet on the cables. It may 
damage the TV set.
Electric Shock 
Do not touch the AC power cord or the TV with a wet hand. If you 
plug/unplug the AC power cord from the TV with a wet hand, it may 
cause electric shock. 
Lightning Storms
For added protection for this TV during a lightning storm, or when it 
is left unattended and unused for long periods of time, unplug it from 
the wall outlet and disconnect the antenna. This will prevent damage 
to the TV due to lightning and power line surges. 
When Not in Use 
If you will not be using the TV set for several days, the TV set should 
be disconnected from the AC power outlet for environmental and 
safety reasons. The TV set is not disconnected from the AC power 
source when the TV set is switched off. To disconnect the TV set 
completely, pull the plug from the AC power outlet. 
Overloading 
This TV set is designed to operate on a 120 V AC supply only. Take 
care not to connect too many appliances to the same AC power 
outlet as this could result in a fire or an electric shock.