Epson EMP-765 User Manual

Page of 121
47
Adjusting the Image Quality
User’s Guide
Selecting the Projection Quality 
(Colour Mode Selection)
The following six preset colour modes are available for use depending on 
the characteristics of the images that are being projected. You can easily 
obtain the optimum image quality simply by selecting the colour mode that 
corresponds to the projected images. The brightness of the images will 
vary depending on which colour mode is selected.
The default setting for the colour mode is as follows.
When computer or RGB video images are being input: "Presentation"
When other images are being input: "Dynamic"
PROCEDURE
The colour mode changes as follows each time the [Color 
Mode] button is pressed.
The current setting appears in the top-right corner of the screen each 
time the colour mode is changed.
Mode
Application
Dynamic
Brightness is emphasised, so that images are fresher and have 
greater modulation than in Presentation mode.
Presentation
Brightness is emphasised to produce images that are ideal for 
presentations.
Theatre
Movie images are optimised using natural tints.
Living Room
Brightness is emphasised to produce images that are ideal for 
projecting TV images, etc. in bright rooms.
Images conform to the sRGB colour standard. If the connected 
source has a sRGB mode, set both the projector and the 
connected signal source to sRGB.
Blackboard
Images with natural tints can be obtained when projecting 
onto a blackboard (green).
Living Room
sRGB
Blackboard
Dynamic
Presentation
Theatre
Remote control
TIP
The colour mode can also be set using the "Color Mode" command in 
the "Image" menu. 
s