Indesit VRM641MDC User Guide

!

 Before operating your new appliance please read 

this instruction booklet carefully. It contains important 
information concerning the safe operation, installation 
and maintenance of the appliance.

!

 Please keep these operating instructions for future 

reference. Pass them on to any new owners of the 
appliance.

!

 Keep all packaging material out of the reach of 

children. It may present a choking or suffocation 
hazard (see Precautions and tips).

!

 The appliance must be installed by a qualified 

professional in accordance with the instructions 
provided. Incorrect installation may cause harm to 
people and animals or may damage property.

Built-in appliance
Use a suitable cabinet to ensure that the appliance 
functions properly.
•  The supporting surface must be heat-resistant up to 

a temperature of approximately 100°C.

•  If the appliance is to be installed above an oven, 

the oven must be equipped with a forced ventilation 
cooling system.

•  Avoid installing the hob above a dishwasher: if this 

cannot be avoided, place a waterproof separation 
device between the two appliances.

•  Depending on the hob you want to install, the 

cabinet must have the following dimensions (see 
fi gure

):

560 +/- 1

490 +/- 1

48

590

520

 

560 +/- 1

490 +/- 1

48

574

504

To allow adequate ventilation and to avoid overheating of 
the surrounding surfaces the hob should be positioned as 
follows:

•  At a minimum distance of 40 mm from the back 

panel.

•  So that a minimum distance of 20 mm is maintained 

between the installation cavity and the cabinet 
underneath.

•  Kitchen cabinets adjacent to the appliance and taller 

than the top of the hob must be at least 600 mm 
from the edge of the hob.

FRONT  SIDE

OF HOB

UNDERSIDE

OF HOB