Brother HE-120 Owner's Manual
136
EMBROIDERY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
CAUTION
Note
z If the initial settings are made with hands or
objects near the carriage, the LCD may
return to the initial display. In such a case,
turn the power on again after removing
whatever is near the carriage.
return to the initial display. In such a case,
turn the power on again after removing
whatever is near the carriage.
X
The screen for selecting the embroidery
pattern group is displayed.
pattern group is displayed.
• For details on Embroidery patterns, refer to
"Selecting embroidery patterns" (page 144).
Memo
z Utility stitches cannot be selected when the
embroidery unit is attached.
Removing the embroidery unit
After removing the embroidery frame, turn off the
machine and remove the embroidery unit.
machine and remove the embroidery unit.
a
Be sure that the sewing machine is stopped.
b
Remove the embroidery frame.
• For details on removing the embroidery
frame, refer to "Removing the embroidery
frame" (page 143).
frame" (page 143).
c
Press
on the LCD.
X
The embroidery carriage moves into a
position where it can be stored.
position where it can be stored.
d
Turn off the sewing machine.
CAUTION
● Do not put your hands or anything else
near the carriage. It could cause injury.
● Always turn off the sewing machine
before removing the embroidery unit.
It could cause malfunctions if removed
when the machine was turned on.
It could cause malfunctions if removed
when the machine was turned on.
SE-BrotherE_sgml.book Page 136 Monday, June 30, 2003 3:44 PM