Brother HE-120 Owner's Manual

Page of 183
GETTING READY
 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
28
• If the needle is not raised to the correct posi-
tion, the needle cannot be threaded with the 
needle threader. Be sure to check that the 
thread cassette indicator is lit up in green 
before inserting the thread cassette.
b
Insert the thread cassette into the thread 
cassette compartment.
Slowly press down on the thread cassette until 
it clicks into place.
a
Push here
a
Needle bar thread hooks
X
At the same time that the thread cassette is 
inserted, the needle is threaded.
X
The thread cassette indicator goes off.
• If the needle could not be threaded or the 
thread was not passed through the needle bar 
thread hook, refer to "Loading the spool into 
the thread cassette" (page 24) and perform 
the procedure again starting from step 
b
.
• The thread cassette can be inserted whenever 
the presser foot lever is raised or lowered. 
However, when the side cutter is attached, 
be sure to lower the presser foot lever before 
installing the thread cassette. For more 
details, refer to "Sewing overcasting stitches 
using the side cutter" (page 76).
CAUTION
c
Carefully pull on the loop of thread passed 
through the eye of the needle to pull out the 
end of the thread.
• When embroidering, go to 
e
.
1
● The needle threader will automatically 
thread the needle when the thread 
cassette is pushed down. Be sure to keep 
your hands and other items away from 
the needle, otherwise injuries may occur.
1
SE-BrotherE_sgml.book  Page 28  Monday, June 30, 2003  3:44 PM