Sony HT-DDWG800 User Manual

 

 

x DUAL (Digital broadcast 

Lets you select the language you want to listen 
to during digital broadcast. This feature only 
functions for Dolby Digital sources.
• DUAL M/S (Main/Sub)

Sound of the main language will be output 
through the front left speaker and sound of 
the sub language will be output through the 
front right speaker simultaneously.

• DUAL  M  (Main)

Sound of the main language will be output.

• DUAL S (Sub)

Sound of the sub language will be output.

• DUAL M+S (Main + Sub)

Mixed sound of both the main and sub 
languages will be output.

x A.V. SYNC. (Synchronizes audio 

• A.V.SYNC. N (No) (Delay time: 0 ms)

The audio output is not delayed.

• A.V.SYNC. Y (Yes) (Delay time: 60 ms)

The audio output is delayed so that the time 
gap between the audio output and visual 
display is minimized.

• This parameter is useful when you use a large LCD 

or plasma monitor or a projector.

• This parameter is valid only when you use a sound 

field selected with the 2CH or A.F.D. button.

• This parameter is not valid when

– signals with a sampling frequency of more than 

48 kHz are input.

– the multi channel Linear PCM signals are 

received via an HDMI IN jack.

x D. ASSIGN (Digital audio input 

Lets you assign the digital audio input to other 
input source. For details, see “Listening to 
digital sound from other inputs (DIGITAL 
ASSIGN)” (page 63).

x NAME IN (Naming inputs)

Lets you set the name of inputs. For details, 
see “Naming inputs” (page 66).

You can use the VIDEO menu to make various 
adjustments for HDMI settings and to name 
inputs.
Select “6-VIDEO” in the amplifier menus. For 
details on adjusting the parameters, see 
“Navigating through menus” (page 37) and 
“Overview of the menus” (page 38).

x AUDIO FOR HDMI (Audio for 

Lets you set the audio output for HDMI from 
the playback component connected to the 
receiver via an HDMI connection.
• AMP

The HDMI audio signals from the playback 
component is only output to the speakers 
connected to the receiver. Multi channel 
sound can be played back as it is.

Audio signals are not output from the TV’s 
speakers when “AUDIO FOR HDMI” is set to 
“AMP”.

• TV+AMP

The sound is output from TV’s speaker and 
the speakers connected to the receiver.

• The sound quality of the playback component 

depends on the TV’s sound quality, such as the 
number of channels, and the sampling 
frequency, etc. When the TV has stereo 
speakers, the sound output from the receiver is 
also stereo as that of the TV, even if you play 
back multi channel software.

• When you connect the receiver to an image 

display component (projector, etc.), sound may 
not be output from the receiver. In this case, 
select “AMP ”.