Toshiba Z930-S9311 User Manual

Page of 169
Glossary
153
B
backup—A copy of a file, usually on a removable disk, kept in case the 
original file is lost or damaged.
Basic Input/Output System (BIOS)—See BIOS.
baud rate—The speed at which a communication device, such as a 
printer or modem, transmits information. Baud rate is the number of 
signal changes per second (not necessarily the same as bits per 
second). See also bits per second.
Blu-ray Disc (BD)—Offering more storage capacity than DVDs, the 
format was developed to allow for more data storage and to enable 
recording and playback of high-definition video (HD).
BIOS (Basic Input/Output System)—Basic instructions, stored in 
read-only memory (ROM), containing the information the computer 
needs to check hardware and load the operating system when you 
start up the computer.
bits per second (bps)—A way of measuring the speed at which 
information is passed between two devices. This is the basic unit of 
measure used in modem communications, and is similar, but not 
identical, to the baud rate. See also baud rate.
boot—To start the computer. The term “boot” originates from bootstrap 
program (as in “pulling itself up by its bootstraps”), a program that 
loads and initializes the operating system. See also reboot.
boot disk—See system disk.
boot priority (startup sequence)—The order in which the computer 
accesses its internal storage drives to locate the startup files. Under 
the default startup sequence, the computer looks for the startup files 
in the external media before checking the internal storage drive.
bus—An electrical circuit that connects the central processing unit 
(CPU) with other parts of the computer, such as the video adapter, 
disk drives, and ports. It is the pathway through which data flows 
from one device to another. See also bus speedfrontside bus.
bus speed—The speed at which the central processing unit (CPU) 
communicates with the other parts of the computer.