Epson EB-Z9900W User Manual
Wired LAN menu
Submenu
Function
IP Settings
You can make settings related to the following addresses.
DHCP
DHCP
: Set to On to configure the network using DHCP
. If this
is set to On, you cannot set any more addresses.
IP Address
IP Address
: You can enter the IP address
assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
: You can enter the Subnet Mask
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
: You can enter the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
IP Address Dis‐
play
play
To prevent the IP address from being displayed on Network Info
in the Network menu and on the LAN Standby screen, set this to
Off
in the Network menu and on the LAN Standby screen, set this to
Off
.
List of Functions
133