Vulcan-Hart C24GA10 ML-136022 User Manual

F35425 (February 2006)

Page 7 of 40

1.

Open the door.

2.

Remove screws from the gasket guard and

gasket plate.

3.

Remove the gasket guard and the gasket plate.

4.

Position the new gasket on the gasket plate.

5.

Reverse the procedure to install.

6.

Adjust the door as outlined under SERVICE

PROCEDURES AND ADJUSTMENTS.

Damage to the gasket sealing surface, such as nicks
or cuts, will cause steam leakage.

1.

Open the door.

2.

Remove screws from the top and bottom of the

door.

3.

Pull the outer door panel out from the door

housing.

4.

Remove the plate, nuts, washers and spacers

from the handle screws and remove the door
handle from the door.

5.

Reverse procedure to install. When installing the

spacers, the smaller diameter fits into the slot in
the door and the latch. Use Loctite 271 to secure
fasteners.

C24GA SERIES CONVECTION STEAMERS - REMOVAL AND REPLACEMENT OF PARTS