Advantech 8G ports Industrial Managed Redundant Gigabit Ethernet Switch User Manual

 

 

 

You can select the ‘Syslog’ and ‘SMTP’ events. When selected events occur, the 
system will send out the log information. Also, per port log and SMTP events can be 
selected. After configuring, Click ‘Apply’. 
 

•  System Event selection: 4 selections – Device cold start, Device warm start, 
    SNMP Authentication Failure, and X-ring topology change. Pull down the selection 
    menu items to select the events. When selected events occur, the system will issue 
    the logs. 

 

¾

  Device cold start: when the device executes cold start action, the system 

will issue a log event. 

¾

  Device warm start: when the device executes warm start, the system will 

issue a log event. 

¾

  Authentication Failure: when the SNMP authentication fails, the system will 

issue a log event. 

¾

  X-ring topology change: when the X-ring topology has changed, the system 

will issue a log event. 

 

•  Port Event selection: Pull down the selection menu items to select the Syslog and 
    SMTP events of each port. It has 3 selections – Link Up, Link Down, and Link UP 
    & Link Down

. Disable means no event is selected. 

 

¾

  Link UP: the system will issue a log message when port connection is up 

only. 

¾

  Link Down: the system will issue a log message when port connection is 

down only. 

¾

  Link UP & Link Down: the system will issue a log message when port 

connection is up and down. 

 

 

 
 

 

You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP 
allows you to synchronize switch clocks in the Internet.