Advantech 8G ports Industrial Managed Redundant Gigabit Ethernet Switch User Manual
111
• Security: when its state is “On” that means this port accepts only one MAC address.
• Click ‘Apply’ button to apply the configuration.
• Click ‘Apply’ button to apply the configuration.
Figure C.33: Port Control
C.2.3 Port Status
In Port Status, you can view every port status that depends on user setting and the
negotiation result.
negotiation result.
Figure C.34: Port Status
• Port No.: select the port that you want to configure.
• State: current port status. The port can be set to disable or enable mode. If the port
setting is disable then will not receive or transmit any packet.
setting is disable then will not receive or transmit any packet.
• Speed/Duplex: set the port link speed.
• Duplex: set full-duplex or half-duplex mode of the port.
• Flow Control: set flow control function is Symmetric or Asymmetric in Full Duplex
mode. The default value is Symmetric.
mode. The default value is Symmetric.
• Security: when its state is “On” that means this port accepts only one MAC address.